SAA ACCREDITED INSTALLERS

Solar battery
installation

Professional solar battery installation for homes in Perth, regional WA and NSW. Our SAA accredited electricians size your system, apply every rebate you qualify for, handle network approval and install to AS/NZS 5139, with $0 upfront and interest-free options for eligible households.

PerthSouth West & Great SouthernSydneyCentral Coast & Albury
Solar panelHome battery
1–2 days
Typical home install
SAA
Accredited for solar and batteries
15+ yrs
In the solar market
NETCC Approved SellerSAA accredited installersAustralian owned
BOOK A FREE SITE CHECK
$0 upfront
Interest-free loan options for eligible customers, subject to approval. Get your tailored quote below.

We use your details only to prepare your quote, as set out in our Privacy Policy.

Step by step

How solar battery installation works

Seven steps from your first call to a working battery. We handle the approvals and paperwork for you.

  1. 01

    Free quote and site check

    We look at your bills, roof, switchboard and where the battery could go, then send a written quote with every rebate shown.

  2. 02

    System design

    We size the battery and inverter to your usage and design the layout, including the battery location and backup circuits.

  3. 03

    Finance and rebate approval

    We apply the federal battery discount and any state rebate, and help with interest-free loan applications if you want one.

  4. 04

    Network application

    We apply to your network for approval to connect, such as Western Power in Perth, or Ausgrid, Endeavour Energy or Essential Energy in NSW.

  5. 05

    Install booked

    Once approval comes through, we book a date that suits you and confirm what will happen on the day.

  6. 06

    Installation day

    Our electricians mount and connect the battery, test everything and show you how it works. Most home installs take a day or two.

  7. 07

    Meter and VPP setup

    Your retailer updates your meter if needed, and we set up the app and any virtual power plant your rebate requires.

What's included

Every installation includes

Site assessment

Switchboard, wall, clearances and cable route checked before you commit.

Approved equipment

Batteries and inverters from the approved list, matched to your solar.

Accredited electricians

Our own SAA accredited installers for solar and batteries.

Placement to AS/NZS 5139

Location, clearances and any barrier or bollard done to the standard.

Safety signage

Shutdown procedure and warning signs at the battery and switchboard.

Commissioning and testing

Every connection tested and the system set up before we leave.

App and backup setup

Monitoring app installed and essential circuits connected for backup.

Paperwork handled

Network approval, compliance certificate, rebate and VPP forms.

Rebates and finance

Battery rebates we claim for you

Every quote shows your price after the federal battery discount and any state support you qualify for. We lodge the paperwork, so the discount comes straight off your price.

Australia-wide

Cheaper Home Batteries Program

An upfront federal discount on approved batteries from 5 to 100 kWh, installed with new or existing solar by an SAA accredited installer. The discount is tapered by usable capacity:

100%0–14 kWh
60%14–28 kWh
15%28–50 kWh
0%50+ kWh
  • The rate steps down on 1 January 2027 and again on 1 July 2027
  • Taken off your price at the point of sale, no claim forms for you
Federal battery rebate guide
Western Australia

WA Residential Battery Scheme

$3,800 max rebate
  • Synergy customers: $130 per kWh, up to $1,300
  • Horizon Power customers: $380 per kWh, up to $3,800
  • You must join a virtual power plant, and we set it up with you
  • Interest-free loans of $2,001 to $10,000 over 3 to 10 years for households earning under $210,000, through Plenti
WA battery rebate guide
New South Wales

NSW battery support

$15,000 interest-free loan
  • Federal discount applies to eligible NSW homes
  • Home Energy Saver interest-free loans of $2,000 to $15,000 over up to 10 years
  • NSW household incentives have changed several times, so we confirm what applies on your install date
  • Business batteries over 20 kWh have their own incentive from 1 September 2026
NSW battery rebate guide

Rebates and loans are set by government and network programs, have eligibility rules and can change. We confirm the amounts that apply to your home in your written quote. See interest-free battery loans.

Placement rules

Where a battery can go

Every battery is installed to AS/NZS 5139:2019 (including Amendment 1:2025), AS/NZS 3000 and the maker's manual. Here is what that means for your home.

A compliant garage battery installation Battery and inverter on a garage wall. A non-combustible barrier extends 600 mm past each side of the battery and 900 mm above it, a bollard protects it from cars, and at least 1 metre of clear floor space is kept in front. 600 mm 600 mm 900 mm Keep clear for access Non-combustible barrier (when needed) Inverter Garage door Bollard if a car could reach it Battery

Allowed

  • Garage or carport wall (garage not used as a living space)
  • Outside wall, ideally shaded, such as under the eaves
  • Dedicated battery room
  • Near a garage door, if people can still pass at least 1 m from the battery

Not allowed

  • Bedrooms, living areas, kitchens and other habitable rooms
  • Ceiling spaces and wall cavities
  • Under stairs or access walkways
  • Escape routes, or anywhere it blocks the switchboard
  • Within 600 mm beside, or 900 mm below, doors, windows, vents and appliances

Wall shared with a bedroom or living room? If it is combustible, such as timber frame, we add a non-combustible barrier extending at least 600 mm past each side of the battery and 900 mm above it. Brick walls usually already comply. Our installer confirms the final spot on site, and you get a printed safety data sheet with every battery. More in the FAQs

Approvals and paperwork

We handle the approvals

Network approval

Before install, we apply to your network to connect the battery and inverter. Your network sets how much you can export.

Electrical compliance

After install, you get the compliance paperwork for your state: an Electrical Safety Certificate in WA, or a Certificate of Compliance for Electrical Work (CCEW) in NSW.

Rebates applied

The federal battery discount needs an approved battery installed by an SAA accredited installer with solar. We lodge it and take it off your price.

VPP setup

Some rebates, such as the WA battery rebate, require joining a virtual power plant. We set it up with you so the rebate isn't missed.

Standards every install is built to

AS/NZS 5139Battery installation safety, including where a battery can go and the clearances around it.
AS/NZS 3000The Wiring Rules for all electrical work in the home.
AS/NZS 4777Grid connection of inverters, so your system meets your network's requirements.
Manufacturer manualEach battery's own installation rules, which protect your warranty.
On the day

What happens on install day

  • We arrive, run a safety check and confirm the battery location with you.
  • There is a short planned power shutdown while we connect. We tell you beforehand.
  • The battery and inverter are mounted and cables run in conduit, with isolators fitted.
  • A bollard goes in if a car could reach the battery, and a fire barrier if the wall needs one.
  • Warning signs and the shutdown procedure are fixed at the battery and switchboard.
  • We commission and test the system and connect your backup circuits.
  • We set up the app, walk you through it and leave the printed safety data sheet.

Already have solar?

We can add a battery to most existing systems. There are two ways to do it:

  • Add a battery with its own inverter (AC-coupled), keeping your current solar inverter.
  • Swap to a hybrid inverter that runs your panels and battery together, often the better choice if your inverter is older.

We check your inverter, panels and switchboard first and recommend the option that suits. Older switchboards sometimes need an upgrade, and we'll tell you in your quote.

See battery packages
Adding a battery to existing solar

AC‑coupled vs DC‑coupled

If you already have solar panels, there are two ways to install a battery. Which one suits depends on your inverter's age, your roof and how much backup you want.

AC-coupled batteryDC-coupled (hybrid inverter)
How it worksThe battery gets its own inverter. Your existing solar inverter stays in place.One hybrid inverter runs your panels and your battery together.
Best forNewer solar inverters that still have plenty of life left.Older inverters, or when you are adding panels at the same time.
EfficiencySolar is converted to AC and back to DC to charge, so a little more energy is lost along the way.Solar charges the battery directly as DC, so fewer conversions and less loss.
InstallSimpler, with no change to your current solar wiring.The old inverter is replaced and the panels are reconnected to the hybrid.
BackupDepends on the battery inverter. Solar may not run in a blackout.Usually lets solar keep charging the battery during a blackout, if backup is set up.

We check your inverter, panels and switchboard at the site assessment and recommend the option that suits. Read the full guide to adding a battery to existing solar.

Batteries we install

Leading battery brands, installed properly

We install approved batteries from established manufacturers and match the battery and inverter to your home. Tap a battery to see how it works.

Compare all batteries side by side

Designing your system

Choosing the right battery setup

A good installation starts with the right design. These are the three decisions we work through with you before anything is installed.

Battery size

We size the battery from your evening and overnight usage, not just your bill total. Too small and you still buy power at night; too big and part of it sits unused. Because the federal discount tapers above 14 kWh and 28 kWh, sizing also affects how much discount you get.

What size battery do I need?

Single or three-phase

We install on both. Most homes are single-phase; larger homes, pools and EV chargers are often three-phase. Your supply decides which inverter we use and how much you can export, which your network sets when it approves the connection.

How installation works

Blackout backup

Not every battery keeps the lights on in an outage by default. We can wire backup to essential circuits, such as the fridge, lights and Wi-Fi, or to the whole home where the system supports it. We agree what is backed up before install day.

Essential vs whole-home backup

Packages for common home sizes

Most homes we design for fit one of our solar + battery packages: 6.6 kW solar with 20 kWh storage for smaller homes, 13.2 kW with 28 kWh for most family homes, and 20 kW with 49.5 kWh for larger homes with pools or EVs. Every package is still designed to your roof, switchboard and usage.

Joining a virtual power plant

A virtual power plant (VPP) lets an energy company draw on your battery at peak times in return for credits or better rates. In WA it is a condition of the state battery rebate. We set it up as part of your installation and explain how it affects your backup and daily savings. How VPPs work.

Is a battery worth it for your home?

Batteries pay off best where feed-in tariffs are low and evening power is expensive, which is the case for most homes in WA and NSW today. We show you the expected savings in your quote so you can decide. Is a battery worth it?

Why Solar Red

Battery installers you can check

A battery is a long-term part of your home. You should know exactly who is installing it and what protects you.

  • Own accredited team. Experienced in-house electricians and full-time installers, SAA accredited for solar and batteries.
  • NETCC Approved Seller. We follow the New Energy Tech Consumer Code on sales, contracts and after-sales care.
  • Licensed. Electrical Contractor Licence 296572C.
  • Plenti approved retailer. We can process the WA interest-free battery loan and apply the state rebate for you.
  • Everything handled. Design, network approval, rebates, installation, VPP setup and compliance paperwork.
15+ yrsIn the solar market
SAAAccredited solar and battery installers
$0Upfront, with interest-free options for eligible homes
Recent installations

Real installs.
Across WA and NSW.

Every system is designed, installed and signed off by our own accredited team. Here are some of the latest.

  • 15+ yrsIn the solar market
  • WA · NSWHomes and businesses
  • SAAAccredited installers
  • NETCCApproved Seller
Happy Solar Red customer next to his new Fox ESS inverter and battery
Happy customer
Fox ESS hybrid inverter and battery with safety bollard, Perth Hills WA
Fox ESS · Perth Hills WA
Aerial view of an aged care facility with 400 solar panels in NSW
Aged care · NSW
Growatt battery stack, Albany WA
Growatt · Albany WA
Solar panels on a metal roof in the Perth Hills, WA
Solar · Perth Hills WA
Growatt battery stack installed in a garage, Perth WA
Growatt · Perth WA
Solar Red installer fitting panels on a farm roof, Great Southern WA
Great Southern WA
Growatt inverter and battery with safety bollard, Perth WA
Growatt · Perth WA
Growatt battery stack, South West WA
Growatt · South West WA
Fox ESS inverter and battery with safety bollard in a garage, Perth WA
Fox ESS · Perth WA
Solar panels on a metal roof, Tamworth NSW
Tamworth NSW
Fox ESS inverter and battery with safety bollards, Peel WA
Fox ESS · Peel WA
Tall Fox ESS modular battery stack
Fox ESS battery
Fox ESS inverter and battery installed on a weatherboard wall, Perth Hills WA
Fox ESS · Perth Hills WA
Growatt battery with safety bollard, Perth WA
Growatt · Perth WA
Fox ESS inverter and battery in a garage, Great Southern WA
Fox ESS · Great Southern
Growatt battery stack on a brick wall
Growatt battery
Black solar panels on a metal roof, Great Southern WA
Solar · Great Southern
Fox ESS inverter and battery in a carport, Perth WA
Fox ESS · Perth WA
Growatt battery stack on a brick wall, Great Southern WA
Growatt · Great Southern
Fox ESS inverter and battery on a white brick wall
Fox ESS hybrid
Two Growatt battery stacks, Perth WA
Growatt · Perth WA
Your place could be next.Free quote, your price after rebates, no obligation.
Questions

Solar battery installation FAQs

How long does a battery installation take?

Most home installs are completed within a day or two. Larger or more complex systems can take longer, and we confirm the timeframe in your quote.

Will my power be off during the install?

Only for a short planned shutdown while we connect the system. We let you know beforehand so you can plan around it.

Can you add a battery to my existing solar?

Usually, yes. We either add a battery with its own inverter and keep your current one, or swap to a hybrid inverter that runs your panels and battery together. We check your system first.

Where can't a battery go?

Under AS/NZS 5139:2019 (including Amendment 1:2025), a battery can't be installed inside a habitable room (bedroom, living area, kitchen, dining room, study), in a ceiling space or wall cavity, under stairs or an access walkway, on a roof unless deemed suitable, in an escape route, or where it blocks the switchboard.

How far must a battery be from doors, windows and appliances?

No battery within 600 mm horizontally of a door or exit, the side of a window or vent opening into a habitable room, or an appliance such as a hot water unit, and none within 900 mm below them. Next to a wide opening like a garage door, it can be closer than 600 mm if people can still pass at least 1 m from the battery.

Do I need a bollard?

Only if a vehicle could reach the battery. The standard says a battery must not go where a vehicle could damage it, so we fit a fixed steel bollard or choose a spot the car can't reach. No set bollard distance is specified; it just has to stop the car touching the battery.

Will I need a switchboard upgrade?

Sometimes. Older switchboards may not have room or the right protection. We check during the site assessment and include any work needed in your quote.

What paperwork do I get?

Your state compliance certificate (an Electrical Safety Certificate in WA or a CCEW in NSW), warranty documents, a printed safety data sheet for the battery, and your system details for the app.

How much does solar battery installation cost?

It depends on the battery size, whether you need a new inverter, your switchboard and how much backup you want. Your written quote shows the full price after the federal discount and any state rebate. Many eligible homes pay $0 upfront using an interest-free loan.

What rebates can I get on a battery installation?

Eligible homes Australia-wide get the federal Cheaper Home Batteries discount, which is tapered by battery size. In WA, Synergy customers can add up to $1,300 and Horizon Power customers up to $3,800 through the WA battery rebate, which needs a virtual power plant. NSW households can access interest-free loans of $2,000 to $15,000. We apply what you qualify for.

Is the federal battery rebate going down?

Yes. The discount is based on a factor that steps down on 1 January 2027 and again on 1 July 2027, so the same battery gets a smaller discount after each date. Installing before a step-down keeps the higher rate.

Do I need an accredited installer to get the rebate?

Yes. The federal discount needs an approved battery installed by an SAA accredited installer. Our electricians are SAA accredited for solar and batteries.

Can a battery be installed outside?

Yes, if the battery is rated for outdoor use. An outside wall that is shaded from direct afternoon sun, such as under the eaves, is ideal. The same clearances from doors, windows and vents apply.

Can you install a battery on a three-phase home?

Yes. We install on single-phase and three-phase homes and choose an inverter that matches your supply.

Will my battery work during a blackout?

Only if backup is set up. We can back up essential circuits or, where the system supports it, the whole home. We agree what is backed up before install day.

Do I have to join a virtual power plant?

Only for some rebates. In WA, the state battery rebate requires you to join a VPP. Elsewhere it is optional and we explain the trade-offs.

Who installs my battery?

Our own SAA accredited electricians and full-time installers. Solar Red holds Electrical Contractor Licence 296572C and is a New Energy Tech Consumer Code Approved Seller.

Which areas do you install in?

Perth and regional WA, including the South West and Great Southern, plus Sydney, the Central Coast, Albury and selected areas of NSW.

Book your solar battery installation

Free, no-obligation quote. Solar Red is an Approved Seller under the New Energy Tech Consumer Code (download the Code).

Get a free quote1800 449 733
Call 1800 449 733Free quote
Google reviews