How to Choose the Right Solar System Size for Your Home: A Complete Guide

Written by the Solar Red team, Osborne Park WA · Reviewed 19 November 2026
The right solar system size is the one that matches how and when your household uses electricity, not the biggest system a salesperson can fit on your roof. In Perth today, most homes land somewhere between 6.6 kW and 13 kW, and the answer changes if you add a battery, an EV or a pool.
This guide walks through how to work out your energy needs, what size suits common household types, and the limits that can cap system size in WA.
Key takeaways
- Start with your bill: your daily kWh usage and when you use it matter more than roof size.
- 6.6 kW suits many smaller homes without a battery; 10 to 13 kW suits larger homes, all-electric homes and homes adding a battery.
- Exports now earn little in most of the day, so size to use and store your solar rather than to export it.
- Network rules, roof space and single- or three-phase supply can limit system size. Your installer checks these.
Step 1: Work out how much electricity you use
Your electricity bill shows your usage in kilowatt-hours (kWh). Divide the total by the number of days in the billing period to get your average daily use. A typical Perth household uses somewhere around 15 to 25 kWh a day, but large families, pools, ducted air-conditioning and EVs can push that much higher.
Next, think about when you use it. Solar panels generate during the day, so homes with people at home, pool pumps or daytime air-conditioning use more solar directly. Households out all day use most of their energy in the morning and evening, which is where a battery helps.
Step 2: Match system size to generation
As a rough guide, each kilowatt of panels in Perth produces about 4 to 4.5 kWh a day averaged across the year, more in summer and less in winter. That means:
- 6.6 kW produces roughly 26 to 30 kWh a day on average.
- 10 kW produces roughly 40 to 45 kWh a day on average.
- 13.2 kW produces roughly 53 to 59 kWh a day on average.
Actual output depends on roof direction, tilt, shading and panel quality. Your quote should include a generation estimate for your roof.
Want a system sized from your actual bills?
Send us a recent bill and our Perth team will recommend panel and battery sizes with a generation estimate for your roof.
Request a free quoteOr call 1800 449 733
Common sizes for Perth households
- Couples or small households, mostly out during the day: 6.6 kW is often enough, especially without a battery. See why Perth homes choose 6.6 kW.
- Families with daytime usage, pools or air-conditioning: 8 to 10 kW.
- Large or all-electric homes, or homes adding a battery or EV: 10 to 13.2 kW or more, subject to network approval.
- Homes with a battery: size the panels to cover daytime use and fully charge the battery on most days.
Our packages, such as the 6.6 kW solar + 20 kWh battery package and the 13.2 kW solar + 28 kWh battery package, show how panels and batteries are commonly paired.
Worked example: a Perth family of four
Say your bill shows 22 kWh a day. You’re out during the day, so about 8 kWh is used in daylight and 14 kWh in the morning and evening.
A 6.6 kW system producing around 28 kWh a day would cover the daytime 8 kWh and export about 20 kWh, most of it at the low midday buyback rate. Adding a battery of around 10 to 13 kWh would let you store much of that surplus for the evening, so you buy far less from the grid.
If you plan an EV, that might add 8 to 10 kWh a day, which pushes the ideal panel size closer to 10 kW. This is why sizing starts with your usage pattern, not your roof.
Why exporting is no longer the goal
In the Synergy network, the Distributed Energy Buyback Scheme pays a higher rate for exports between 3pm and 9pm and a much lower rate at other times. Most solar is generated in the middle of the day, so most exports earn very little.
That’s why the best value now comes from using your solar in the home, shifting flexible loads into the middle of the day, and storing surplus in a battery for the evening. See Solar feed-in tariffs for details.
Single-phase vs three-phase homes
Most Perth homes are single-phase. In the Western Power network, single-phase homes are generally limited to a 5 kW inverter for standard connections, which is why 6.6 kW of panels on a 5 kW inverter is so common. Larger single-phase systems may need export limits or a specific network assessment.
Three-phase homes can usually connect larger inverters, which suits big homes, all-electric homes and larger batteries. Your installer will confirm what your connection allows before quoting.
Planning for future needs
It usually costs less to install a slightly larger system now than to add panels later. Consider sizing up if you’re planning to:
- Buy an electric vehicle.
- Add a battery.
- Install a pool or spa.
- Replace gas cooking, heating or hot water with electric.
- Add air-conditioning, a granny flat or a home office.
What can limit your system size?
- Network rules: Western Power and Horizon Power set limits on inverter size and exports, which depend on whether your home has single-phase or three-phase power.
- Roof space and shading: the usable north, east and west roof area sets how many panels fit.
- Budget: the federal STC discount reduces the upfront cost, and interest-free battery loans can help with storage.
Your installer will check these during the site assessment. Read WA solar and battery rules for the latest WA requirements.
Do you need a battery as well?
With the federal battery discount and, for eligible households, the WA Residential Battery Scheme, batteries are far more affordable than they were a few years ago. A battery makes most sense if you use a lot of power after sunset, want backup during outages, or export a lot of solar for little return.
Use What size battery do I need? and Do you actually need a solar battery? to decide, or ask us to size a system from your bills.
Sizing mistakes to avoid
- Choosing the biggest system without checking how much you’ll actually use.
- Ignoring winter output, when a battery may not fill from a small system.
- Forgetting future loads like an EV, pool or electric hot water.
- Comparing quotes on price per kW without comparing panel and inverter brands.
- Not asking for a generation estimate based on your roof.
Related guides
- Why Perth homes choose 6.6 kW solar
- What size battery do I need?
- Do you actually need a solar battery?
- Solar battery cost in Perth after rebates
- Solar feed-in tariffs
- WA solar and battery rules
Frequently asked questions
What size solar system do I need for a 4-bedroom house in Perth?
Many 4-bedroom homes suit 8 to 13 kW, depending on daily usage, pool and air-conditioning use, and whether a battery is planned. Your bill is the best starting point.
Is 6.6 kW enough for a family?
It can be for smaller families who are out during the day. Larger families, all-electric homes and homes adding a battery usually benefit from a bigger system.
How much does a 6.6 kW system produce in Perth?
Roughly 26 to 30 kWh a day averaged across the year, depending on roof direction, tilt and shading.
Can I add more panels later?
Usually yes, but it can be more expensive and may require a new or second inverter. Network limits also apply, so it’s often better to size for future needs upfront.
Official sources
- Synergy: Distributed Energy Buyback Scheme
- Energy buyback schemes (Energy Policy WA)
- Western Power
- Clean Energy Regulator: Small-scale Renewable Energy Scheme
- Cheaper Home Batteries Program (DCCEEW)
Rebates, rules and product specifications change. This guide was checked against the sources above on 19 November 2026. Your quote from Solar Red confirms the figures that apply to your home.


