10 kW solar system in Perth: panels, output and who it suits

Updated 21/11/2026

Home › Blog › 10 kW solar system

Perth & WASystem sizingUpdated November 2026

10 kW solar system in Perth: how many panels, how much power, and is it right for you?

A 10 kW solar system is a popular upgrade for growing Perth families. Here is how many panels it takes, what it produces through the year using Bureau of Meteorology data, whether WA’s rules allow it on your home, and how a battery fits in.

By the Solar Red team · 6 minute read

Close-up of solar panels under a blue sky

The short answer

  • Panels: about 23 panels at 440 W, or 21 at 475 W.
  • Output: roughly 43 kWh a day on average in Perth, from about 21 in June to 66 in December (estimates from BOM data).
  • Roof space: allow roughly 42 m², at about 2 m² per panel.
  • WA rules: since 1 May 2026, homes on the SWIS can install up to 30 kVA of total inverter capacity on a standard connection, subject to Western Power approval.
  • Best with a battery: a battery lets you use more of the daytime output in the evening instead of exporting it cheaply.
In this guide
  1. How many panels is 10 kW?
  2. How much does a 10 kW system produce in Perth?
  3. Who a 10 kW system suits
  4. WA rules for bigger systems
  5. Pairing it with a battery
  6. FAQs

How many panels is 10 kW?

Divide the system size by the panel wattage. Most panels we install today are between 440 W and 475 W.

Panel sizePanels for 10 kWApprox. roof area
440 W23~46 m²
475 W21~42 m²

Exact numbers depend on the panel model and your roof layout. Panels can be split across north, east and west faces.

How much does a 10 kW system produce in Perth?

These estimates use the Bureau of Meteorology’s average daily solar exposure for Perth on a flat surface, with about 80% of that sunshine ending up as usable power after losses. Real output depends on roof direction, tilt and shading.

~66 kWha day in December
~43 kWha day on average across the year
~21 kWha day in June (flat-surface basis)

Tilted panels catch more winter sun than these flat-surface figures suggest. See solar output in a Perth winter.

Who a 10 kW system suits

A good fit if: you are a family with high evening use, you plan to add a battery or an EV, or you run ducted air con and a pool pump.
Maybe not if: your roof only fits a handful of panels, or your daytime use is small and you will not add a battery.

WA rules for bigger systems

30 kVA totalFrom 1 May 2026, all inverter capacity on the property, solar and battery combined, counts towards a 30 kVA limit for a standard connection.
Export limitsWestern Power sets how much you can send back to the grid. Bigger systems often export less than they produce, which is why a battery helps.
CommunicationsNew systems must stay connected. If they lose communications, a lower export limit applies.
PhaseLarger systems often need three-phase power. We check your connection and switchboard at the site visit.

Pairing it with a battery

A battery lets you use more of the daytime output in the evening instead of exporting it cheaply. Daytime exports earn just 2c per kWh under Synergy’s DEBS outside 3pm to 9pm, so storing your solar for the evening is usually worth far more. See what size battery you need and our packages like the 13.2 kW + 28 kWh package.

Frequently asked questions

How many panels is a 10 kW solar system?
About 23 panels at 440 W or 21 panels at 475 W. The exact number depends on the panel model.
How much power does a 10 kW system produce in Perth?
Roughly 43 kWh a day on average, from about 21 kWh in June to about 66 kWh in December, based on Bureau of Meteorology solar data. These are estimates; your roof direction, tilt and shading change the result.
Can I install a 10 kW system in WA?
Since 1 May 2026, homes on the SWIS can install up to 30 kVA of total inverter capacity on a standard connection, subject to Western Power approval and export limits.
Is 10 kW too big for a Perth home?
Not if you have high usage, an EV, or a battery to store the surplus. Without a battery, a lot of the midday output may be exported for very little.

Is 10 kW right for your home?

Tell us your suburb and send a photo of your latest Synergy bill and your switchboard. A local SAA-accredited electrician will look at your home and give you a fixed, itemised quote with every rebate already taken off.

Call 1800 449 733Get a free quote

Keep reading

Sources: Bureau of Meteorology: Perth climate averages (solar exposure), Energy Policy WA: New requirements for solar and batteries, Synergy: DEBS buyback rates. Rules, rates and rebates change; we check them again when we quote.

Call 1800 449 733Free quote
Google reviews