Solar and a battery on a new build in Perth: what to plan before you build

Updated 21/11/2026

Home › Blog › New build solar

Perth & WANew homesUpdated November 2026

Solar and a battery on a new build in Perth

Building a new home is the cheapest time to plan solar and a battery. Walls are open, the switchboard has not been chosen and the garage layout is still on paper. A few decisions now save cost and mess later, even if the battery comes a year or two after you move in.

By the Solar Red team · 6 minute read

House under construction with scaffolding

The short answer

  • Plan the battery spot now: a garage wall near the switchboard, with room for a bollard.
  • Ask for switchboard space: leave room for solar, battery and backup breakers.
  • Run conduit early: a spare conduit from roof to switchboard and to the battery spot saves cutting walls later.
  • Check the builder’s package: compare panel, inverter and battery models before you accept it.
  • Think about the roof: north, east and west faces with little shading suit solar.
In this guide
  1. Builder packages vs your own installer
  2. What to plan before the walls go up
  3. WA rules to know
  4. Roof design tips
  5. FAQs

Builder packages vs your own installer

Many builders offer a solar package. It is convenient, but check exactly what it includes: panel brand and wattage, inverter model, whether the inverter can take a battery, and the warranty. Some homeowners choose a basic builder package, then add their own hybrid system and battery after handover. Either way, the planning below makes it easier.

What to plan before the walls go up

Battery location

Usually a garage wall close to the switchboard. It must meet AS/NZS 5139: not in habitable rooms, with clearances from doors and windows, and protected from cars.

Switchboard space

Ask your electrician for spare space for solar, battery and backup circuits.

Conduits

Run spare conduits from the roof space to the switchboard and battery location.

Wi-Fi at the garage

New systems need to stay online, so make sure the signal reaches the inverter location.

EV charger circuit

Even if you do not have an EV yet, a cable run to the garage now is cheap.

WA rules to know

Since 1 May 2026, homes on the SWIS can install up to 30 kVA of total inverter capacity on a standard connection, for single and three-phase homes. New systems need communications, and if they drop offline they fall back to a lower export limit. Approvals are still needed before installation.

Roof design tips

Keep faces clearAvoid vents, skylights and aerials on the best solar faces where you can.
East-west works wellSpreads production across the morning and the afternoon.
Two-storey homesPlan safe access for installation and maintenance.

Frequently asked questions

Should I take the builder's solar package?
It can be convenient, but compare the models and warranty with an independent quote, and check whether the inverter can take a battery later.
Can I add a battery after I move in?
Yes. Planning the battery location, switchboard space and conduits during the build makes adding it later quicker and cheaper.
Where should a battery go in a new home?
Usually a garage wall near the switchboard, following AS/NZS 5139 location rules and protected from vehicles.
How big can my solar be on a new home in WA?
Since 1 May 2026, homes on the SWIS can install up to 30 kVA of total inverter capacity on a standard connection, subject to Western Power approval.

Building soon?

Send us your plans and builder’s electrical layout. We will tell you where the battery and inverter should go and what to ask your builder for.

Call 1800 449 733Get a free quote

Keep reading

Sources: Energy Policy WA: New requirements for solar and batteries, Western Power: Solar and battery connections up to 30 kVA. Rules, rates and rebates change; we check them again when we quote.

Call 1800 449 733Free quote
Google reviews