Tesla Powerwall 3 in Perth: sizing, rebates and installation

Updated 21/11/2026

Home › Blog › Tesla Powerwall 3 Perth

Perth & WATesla certified installerUpdated November 2026

Tesla Powerwall 3 in Perth: what it is, who it suits and how we install it

The Powerwall 3 is Tesla’s all-in-one home battery: a 13.5 kWh battery and a solar inverter in one wall-mounted unit. As a Tesla Powerwall certified installer in Perth, here is what we tell homeowners before they buy one: what it does well, where it is not the right fit, and how it works with WA’s rules and rebates.

By the Solar Red team · 9 minute read

Home battery and inverter mounted on a wall

The short answer

  • What it is: one 13.5 kWh LFP battery with a built-in solar inverter, so panels can plug straight into it.
  • Who it suits: single-phase Perth homes that want a tidy, whole-of-home battery with a well-proven app.
  • Room to grow: up to three Powerwall 3 Expansion units can be added later, for 54 kWh in total.
  • Rebates: the WA rebate needs an approved product and VPP participation, so we confirm both on your quote.
  • Installed by us: Solar Red is a Tesla Powerwall certified installer, using local SAA and battery-accredited electricians.
In this guide
  1. What the Powerwall 3 actually is
  2. Who the Powerwall 3 suits (and who it does not)
  3. Is one Powerwall enough for a Perth home?
  4. Rebates, the interest-free loan and VPP rules
  5. What a Powerwall 3 install looks like with us
  6. Powerwall 3 or another battery?
  7. FAQs

What the Powerwall 3 actually is

Earlier Powerwalls were just a battery. You still needed a separate solar inverter on the wall. The Powerwall 3 puts both into one unit. Your solar panels connect to it directly, it stores what you do not use during the day, and it powers the house at night.

13.5 kWhusable energy per unit
5 kWmaximum continuous charging power
Up to 11.04 kWoutput, configured to suit your connection
54 kWhmaximum with three Expansion units

Tesla’s Australian datasheet lists the Powerwall 3 as a single-phase, 230 V unit with lithium iron phosphate (LFP) cells. It is rated to operate from −20°C to 50°C, which covers a Perth summer in a shaded garage or on a sheltered wall.

Worth knowing: the output figure is configurable. Your installer sets it to meet Western Power’s rules for your home, so the number on your system may be lower than the headline 11.04 kW.

Who the Powerwall 3 suits (and who it does not)

A good fit if: you have a single-phase home, you are adding new panels or replacing an old inverter, you want whole-of-home backup on one phase, and you value a polished app with live monitoring and storm alerts.
Think twice if: you have a three-phase home and want all three phases backed up, you already have a newer solar inverter you want to keep, or you want more than 13.5 kWh on day one at the lowest cost per kWh.

Three-phase is the big one. The Australian Powerwall 3 is a single-phase unit, so on a three-phase home it connects to one phase. That is fine for many families, because we put the fridge, lights and power points on the backed-up phase. If you need ducted air con or a pool pump running in a blackout, a three-phase hybrid system may suit you better, and we will tell you so.

Is one Powerwall enough for a Perth home?

Start with your bill, not the brochure. Look at how much you use between about 3pm and the next morning, because that is the energy a battery has to cover. That number varies a lot from home to home, so it is worth checking yours in your Synergy account.

Your evening and overnight useWhat usually works
Up to about 12 kWhOne Powerwall 3 (13.5 kWh)
About 12–25 kWhPowerwall 3 plus one Expansion (27 kWh)
More than 25 kWh, or an EV charged at nightPowerwall 3 plus two or three Expansions, or a larger modular system

The other limit is charging speed. The Powerwall 3 charges at up to 5 kW, so a full 13.5 kWh charge needs at least two to three hours of strong surplus solar. That is easy in a Perth summer and tighter in July. We check your roof space and panel size so the battery actually fills up most days. Our battery sizing guide walks through the maths.

Rebates, the interest-free loan and VPP rules

Two schemes can bring the price down: the federal Cheaper Home Batteries Program and the WA Residential Battery Scheme. For Synergy customers, the WA rebate is $130 per kWh of usable capacity, up to $1,300, which is reached at 10 kWh. Eligible households can also apply for a no-interest loan.

Approved productThe exact battery and inverter must be on the scheme’s approved list. We confirm the model before you sign.
Virtual power plantThe WA scheme requires you to join an eligible VPP and keep the battery online.
Installed after 1 July 2025Batteries installed before then are not eligible for the WA rebate or loan.
Federal rebateApplied as a discount on your invoice. The amount depends on capacity and is stepping down over time.

Our quote shows each rebate as its own line, so you can see exactly what you are paying. For the details, read our WA battery rebate guide and the interest-free loan guide.

What a Powerwall 3 install looks like with us

Site check and design

We look at your switchboard, meter, roof and where the battery can go under AS/NZS 5139. We also decide which circuits will be backed up.

Approvals

We lodge the Synergy and Western Power applications, plus the rebate paperwork if you are eligible, before anything goes on the wall.

Install day

Most installs take a day. The power is off for a few hours while the switchboard work and the Tesla Gateway or backup switch go in.

Commissioning

We set the export and output limits for your connection, connect it to Wi-Fi, set up the app with you and test backup by switching off the grid.

Paperwork

You receive your Electrical Safety Certificate, warranty registration and a walkthrough of the app before we leave.

For the full process, from the meter box to the paperwork, see how a solar battery is installed in Perth.

Powerwall 3 or another battery?

We install several brands, so we are not tied to one answer. Here is how we explain it to customers:

Tesla Powerwall 3Modular hybrid systems
Capacity steps13.5 kWh blocksOften smaller steps, e.g. 5–10 kWh modules
PhasesSingle-phaseSingle and three-phase options
InverterBuilt inBuilt in or matched hybrid inverter
App and backupVery polished, whole-of-home on one phaseVaries by brand

If the Powerwall 3 is not the best fit for your home, we will say so and show you the alternative side by side. See our best solar batteries guide for the other brands we install.

Frequently asked questions

How much usable storage does a Powerwall 3 have?
Each Powerwall 3 stores 13.5 kWh of usable energy. You can add up to three Powerwall 3 Expansion units for a total of 54 kWh.
Does the Powerwall 3 work on a three-phase home?
Yes, but the Australian Powerwall 3 is a single-phase unit. On a three-phase home it connects to one phase, and backup covers the circuits on that phase.
Is the Powerwall 3 eligible for the WA battery rebate?
The WA scheme only pays for approved products and requires you to join an eligible virtual power plant. We check that the exact model and setup qualify before you sign, and show the rebate as its own line on your quote.
Will my Powerwall 3 keep the lights on in a blackout?
Yes. With the backup equipment installed, it switches the backed-up circuits over automatically when the grid goes down. We test this on install day by switching off the grid supply.
Can I keep my existing solar inverter with a Powerwall 3?
Often yes, because the Powerwall 3 can also charge from AC solar. But the total inverter capacity on your property has to stay within Western Power’s 30 kVA limit, and older inverters may need a communications upgrade. We check this at the site visit.
Is Solar Red a certified Tesla installer?
Yes. Solar Red is a Tesla Powerwall certified installer, and all our installs are done by local SAA and battery-accredited electricians.

Want to know if a Powerwall 3 suits your home?

Tell us your suburb and send a photo of your latest Synergy bill and your switchboard. A local SAA-accredited electrician will look at your home and give you a fixed, itemised quote with every rebate already taken off.

Call 1800 449 733Get a free quote

Keep reading

Sources: Tesla: Powerwall 3 datasheet (Australia), WA Government: WA Residential Battery Scheme, WA Government: Information for applicants, Energy Policy WA: New requirements for solar and batteries. Rules, rates and rebates change; we check them again when we quote.

Call 1800 449 733Free quote
Google reviews