Installed by licensed, accredited electricians, with every rebate applied upfront. 0% interest through the WA Government's state interest-free battery loan (up to $10,000) or a Brighte 0% plan, subject to eligibility.



See why Solar Red is one of the best solar installation companies
Rebates come off first, then spread the rest over up to 10 years with the WA Government's state-supported interest-free loan (up to $10,000) or a Brighte 0% payment plan.
$2,001 to $10,000 over 3 to 10 years under the WA Government's Residential Battery Scheme, alongside the state battery rebate. No interest, no establishment or account fees, no security.
$1,000 to $60,000 over 6 months to 10 years, paid fortnightly. Brighte's fees and terms apply.
Federal Cheaper Home Batteries rebate, plus the WA rebate of up to $1,300 (Synergy) or $3,800 (Horizon Power). The federal rebate steps down on 1 January 2027.
Larger systems or not eligible for 0%? Borrow $2,000 to $45,000 over 3 to 7 years. Plenti's interest rate, fees and terms apply. Check your rate without affecting your credit score.
Choose a battery or solar package and get a fixed, itemised quote.
We apply the rebates and lodge your Plenti or Brighte application with your quote.
Our electricians install your system. Nothing to pay on the day.
Repay at 0% interest over up to 10 years while the system cuts your bills.
Eligibility applies. The WA 0% loan is for WA residents aged 18+ who are Australian citizens or permanent residents, with household income under $210,000, on Synergy or Horizon Power, and the battery must join a virtual power plant. Subject to Plenti's credit assessment. See our finance disclaimer.
Fixed, itemised packages with every rebate taken off, installed by accredited electricians.
*Estimated yearly savings. Home packages assume Perth solar output of 4 kWh a day per kW of panels and a household using 20, 35 or 60 kWh a day (6.6 kW, 13.2 kW and 20 kW packages). About 35% of that usage happens while the sun is up and is met directly by solar; the battery (90% usable, 90% round-trip efficiency) covers evening and overnight use; the rest is exported at the 2c/kWh DEBS rate. Savings are valued at the Synergy A1 rate of 33.26c/kWh (from 1 July 2026). Business packages assume 70% of solar used on site at an assumed 30c/kWh. Real savings depend on your usage, tariff and site, and exclude supply charges and VPP payments. Finance is subject to lender approval. Rebates depend on eligibility and can change.
Fill in the form above or call us today on 1800 449 733. Our friendly admin team will contact you as soon as possible.
Get a free guide
Australia's best batteries and panels, installed by our own SAA accredited electricians, with every rebate taken off first.
Compare our top-rated batteries and panels, then get a fixed, itemised quote with every rebate applied.
How battery sizes work: every battery here is built from modules that stack like blocks. More blocks means more storage. Most Perth homes suit 20–28 kWh, and every kWh up to 28 kWh earns the higher federal rebate rates. We size it to your bills, and you can add blocks later.
Inverter and battery in one sealed tower, with a built-in 63A gateway that keeps your whole home running in a blackout.
Specs from Fox ESS PQ1 + EQ5500 datasheet. Backup power is limited by inverter size.
Every system is designed, installed and signed off by our own accredited team. Here are some of the latest.
Short clips from real jobs, from family homes to working businesses. Tap any video to watch.
Solar Red is a 100% Australian-owned solar retailer specialising in residential and commercial solar installation. Seven steps from quote to meter.
Contact our team by phone, email or web to get a free solar quote.
Our solar consultant designs a tailored system for your home or business.
We lodge your WA rebate and your Plenti 0% loan or Brighte application, and you get approval before anything is installed.
We lodge a grid application with your energy distributor.
Once the grid application is approved, we call you to book your installation.
SAA accredited installers carry out your installation.
Once your solar is installed, your energy retailer configures your meter.
Leading panels, batteries and inverters from brands we trust and install every week.
Plain-English articles from our team on batteries, rebates and the systems we install.
Two, and they stack. The federal Cheaper Home Batteries Program takes a discount off your quote upfront. On top of that, the WA Residential Battery Scheme pays $130 per kWh of usable capacity up to $1,300 for Synergy customers, or $380 per kWh up to $3,800 for Horizon Power customers. We apply both for you.
It is paid as certificates (STCs) based on usable capacity and your install date. The first 14 kWh gets full support, 14 to 28 kWh gets 60%, and 28 to 50 kWh gets 15%. Nothing above 50 kWh is supported. The STC factor is 6.8 for installs from May to December 2026 and drops to 5.7 from 1 January 2027, so the same battery gets less rebate next year.
Since 1 May 2026 the federal rebate tapers by size. Most of the support sits in the first 28 kWh, which is why our 27 to 28 kWh systems are the sweet spot for value.
For the WA state rebate, yes. You enrol in a Virtual Power Plant, such as Synergy's, so your battery can occasionally support the grid at peak times. It still powers your home first. For the federal rebate, the battery's inverter must be VPP-capable, but joining a VPP is not required.
It's a WA Government loan, not a private one. Under the state's Residential Battery Scheme, eligible WA households earning under $210,000 can borrow $2,001 to $10,000 interest-free over 3 to 10 years. Plenti delivers it for the state, and we set it up with your quote.
Yes. The NSW Government's Home Energy Saver program offers $2,000 to $15,000 interest-free over up to 10 years for eligible households.
Only on the government 0% loans. The WA loan needs a household income under $210,000, and the NSW loan needs a household taxable income of $150,000 or less. The federal battery rebate has no income test.
Yes. The battery must be installed with a new or existing solar system. If you already have solar, we add the battery to it.
The WA scheme covers residential properties, including rentals with the landlord's consent. Talk to us and we'll confirm eligibility for your property before you commit.
Yes. The federal battery rebate drops on a set schedule until it ends in 2030, and it now falls every six months. Installs from May to December 2026 get an STC factor of 6.8, which drops to 5.7 from 1 January 2027 and 5.2 from 1 July 2027. The rebate is based on your install date, so installing sooner gets you more.
Yes. It is a one-off discount on your battery system, taken off your price at the time of installation. It is not an ongoing payment, and it can't be claimed again later on the same system, so it pays to size your battery right the first time.
Yes. We connect a hybrid inverter and battery to your current panels, so you keep the solar you already own. We check your existing system is safe and compliant first.
Only if the system is set up for backup, so ask before you buy. Some systems back up selected circuits, others the whole home. The Fox ESS Power Cube with its AirGate gives full-home blackout protection. We'll show you exactly what your system covers on the quote.
It depends on how much power you use in the evening and overnight. We size it from your power bill. Our packages run from 20 kWh to 49.5 kWh, and we'll match the size to your usage.
Fox ESS (including the Power Cube), GoodWe ESA, Sigenergy, Growatt, AlphaESS and SolaX, all on the Clean Energy Council approved list. We'll recommend the best fit for your home and budget.
Usually, yes. The batteries we install are modular, so you can add modules from the same series later. Note the rebate is only available at the original install.
The batteries we install use lithium iron phosphate (LFP) cells, built for thousands of charge cycles. Most come with a 10-year manufacturer warranty, and your quote lists the exact terms.
Yes, when installed properly. LFP batteries are among the most stable chemistries, and we install to the Australian battery standard AS/NZS 5139, which sets where a battery can go and the clearances around it.
Common compliant spots are a garage or carport wall, an outside wall (ideally shaded, such as under the eaves), or a dedicated battery room. Every location must meet AS/NZS 5139:2019 (including Amendment 1:2025), the wiring rules AS/NZS 3000, and the battery maker's installation manual. Our installer confirms the exact spot on site before anything is mounted.
Under AS/NZS 5139:2019 (including Amendment 1:2025), a battery can't be installed: inside a habitable room (bedroom, living or family room, kitchen, dining room, study, rumpus room or home theatre); in a ceiling space or wall cavity; under a staircase or access walkway; on a roof, unless the location is specifically deemed suitable; in an evacuation or escape route; or anywhere that blocks access to your switchboard.
The standard sets a restricted zone. A battery can't sit within 600 mm horizontally of an exit or door, of the side of a window or building vent that opens into a habitable room, or of an appliance such as a hot water system or air-conditioner unit. It also can't sit within 900 mm below any of these. The battery's own inverter is allowed inside this zone. We also follow the maker's clearances around the unit, which are often 200 to 300 mm.
Yes. Garages are one of the most common spots, as long as the garage isn't used as a living space. A battery normally can't sit within 600 mm of a door or exit. The exception is a wide opening (over 900 mm) such as a garage door: under Amendment 1 (2025) the battery can be closer than 600 mm, as long as people can still pass through the opening at least 1 m from the battery. The standard also says a battery can't go where a vehicle could damage it. If a car could reach it, we fit a fixed steel bollard or choose a spot the car can't reach. The standard doesn't set a distance for the bollard; it just has to stop the car touching the battery.
Only in some cases. If a habitable room is on the other side of the wall and the wall is combustible (for example timber frame with plasterboard), a non-combustible barrier is needed. It must extend at least 600 mm past each side of the battery and 900 mm above it. Suitable materials include brick or masonry, concrete, fibre-cement sheet and ceramic tiles, and exempt barrier materials must be at least 6 mm thick. A solid brick wall usually already complies.
Home batteries are installed to AS/NZS 5139:2019 (including Amendment 1:2025), AS/NZS 3000 and the manufacturer's instructions. Amendment 1 was published on 19 December 2025 and is mandatory in WA from 19 June 2026, and NSW has also made it mandatory. We leave a printed safety data sheet with every battery, as the amendment requires.
Yes. We install single-phase and three-phase hybrid inverters and batteries.
For most homes, yes. Under Synergy's DEBS plan your exported solar earns as little as 2c per kWh for most of the day, while power you buy back at night costs far more. A battery stores your solar for the evening instead of selling it cheap.
Yes. Systems up to 100 kW get small-scale technology certificates (STCs), which come off your upfront price. Like the battery rebate, it reduces each year until 2030.
High-efficiency panels from Jinko, AIKO, Trina and LONGi, around 23 to 24% efficient in the models we install.
We size it from your daily usage and roof space, and allow for charging a battery if you're adding one.
Yes, at reduced output. A battery helps by storing extra power on sunny days.
Local Perth electricians who are SAA accredited for both solar and battery installation. Our team includes experienced in-house electricians.
Free quote, system design, finance and rebate approval, grid application, scheduling, installation, then your retailer sets up your meter. We handle the paperwork in between.
Yes. We lodge the grid application with your network, such as Western Power in Perth, and book your install once it's approved.
Most home installs are completed within a day or two. Larger or more complex systems can take longer, and we'll confirm the timeframe upfront.
Perth and across WA, including Bunbury and Albany, and selected areas of NSW.
It depends on your system size, your home and the rebates you qualify for. Get a free quote and we'll show you the full price after rebates, with 0% loan options.
We use cookies to understand how the site is used and to show relevant ads. Necessary cookies are always on. You can accept all, reject all or choose. See our Cookie policy.

















































Battery guides
Solar Battery Installation Perth
How a home battery installation works in Perth, step by step.
Read article
Battery guides
Solar Battery Storage Installation Perth
Battery storage for Perth homes, from quote to install.
Read article
Battery guides
23.3 kWh Solar Battery Perth
What a 23.3 kWh system suits and how it is sized.
Read article
Product reviews
GoodWe 40 kWh ESA All-in-One
Single-column design, specs, warranty and who it suits.
Read article
Product reviews
Growatt 40 kWh ALP / APX
Single-phase ALP and three-phase APX two-stack builds.
Read article
Product reviews
SolaX Battery Features and Benefits
What SolaX batteries offer homeowners.
Read article
0%
Rebates & finance
WA Interest-Free Battery Loan
How the 0% WA battery loan works, who qualifies and how to apply.
Read article
NSW
Rebates & finance
NSW Interest-Free Battery Loan
The NSW 0% loan through Brighte and Plenti, explained.
Read article
WA
Compliance
WA Solar Battery Rules
The WA rules that apply to new solar and battery systems.
Read article
Battery guides
Do You Need a Solar Battery in Perth?
An honest look at who benefits from a battery and who doesn't.
Read article
Battery guides
20 kWh Solar Battery: Right Size for You?
When a 20 kWh battery makes sense for your home.
Read article
Battery guides
28 kWh Solar Battery Perth
What a 28 kWh system suits and how it is sized.
Read article
Product reviews
Fox ESS 41.76 kWh CQ7 + H3 15 kW
High-capacity three-phase build, including retrofit options.
Read article
Product reviews
AlphaESS SMILE-M5 27.98 kWh
A mid-size option for family homes, reviewed.
Read article
Product reviews
Growatt Battery Solutions Perth
Growatt battery options for Perth homes.
Read article
1-2-3
Rebates & finance
WA Interest-Free Battery Loan: Step by Step
Applying for the WA 0% battery loan, step by step.
Read article
PDRS
Rebates & finance
NSW Commercial Battery Rebate 2026: STCs vs PDRS
How STCs and PDRS apply to business batteries in NSW.
Read article
Compliance
Growatt CT Wiring and Error 401
CT placement and wiring, and how to fix Growatt Error 401.
Read article